AEGIS Shaft Voltage Tester

  • Unit price per 

Where to Buy

Digital Oscilloscope and Multimeter
with Conductive Microfiber Probe Tips

Is your motor safe from destructive shaft voltage?  The AEGIS® Shaft Voltage Tester™ Digital Oscilloscope bundle includes the AEGIS-OSC-9200 100 MHz digital oscilloscope, shaft voltage probe tips, and a shaft grounding simulator.  Armed with these tools, you can quickly and easily find whether your motors are at risk of premature bearing failure due to VFD-produced bearing current.

Overview

Electrical Bearing Damage: Capacitive coupling between windings and rotor can create voltage on a motor's shaft — voltage that can discharge through bearings, damaging them and shortening motor life.  For motors controlled by variable frequency drives, however, this voltage can be as high as 10-40 volts peak.  At these higher levels, voltage can easily cause electric electrical discharge in the motor bearings, causing pitting, fusion craters, and fluting, which eventually lead to premature bearing and motor failure.

Until now, the only way to tell whether a motor was at risk for such bearing damage was to buy, rent, or borrow an oscilloscope and then buy some type of shaft voltage probe. But now there is a total shaft voltage detection system available in one package.

With the AEGIS® Shaft Voltage Tester™ Digital Oscilloscope, plant maintenance personnel can take shaft voltage readings from motor shafts quickly and easily – readings that confirm or deny the presence of shaft voltage discharges that can damage motor bearings.   Users who already have a 10:1 oscilloscope with bandwidth at least 100 MHz will be able to measure shaft voltage with it and an appropriate set of our SVP Tips. 

Note: For motors powered across the line by sine wave AC power, this voltage is typically 100-200 millivolts at 60/50 Hz and will not cause problems with electrical bearing discharges.

The following equipment is required to test for damaging shaft current:

Recommended Testing Equipment

AEGIS Shaft Voltage Tester
  • Oscilloscope with a 10:1 probe. We recommend a minimum bandwidth of 100 MHz to accurately measure the shaft voltage waveform.
  • *Recommended: AEGIS Shaft Voltage Tester with Shaft Voltage Probe Tips, Magnetic Base, and Shaft Grounding Simulator PN: AEGIS-OSC-9200MB-W2
Part Number Comparison

The part numbers in the table below are for North American customers only.  For intercontinental customers, only scopes with two-year warranties are available.  The intercontinental part numbers for uncalibrated scopes have an added -I suffix: AEGIS-OSC-9200-W2-I and AEGIS-OSC-9200MB-W2-I.  The part number for the ISO calibrated Tester™ is the same as for North American customers.  All part numbers with a -I include a universal power adapter kit to fit regional electric sockets.


Component
AEGIS-OSC-
9200-A
AEGIS-OSC-
9200-W2
AEGIS-OSC-
9200MB-W2
AEGIS-OSC-
9200MB-W2-IC
AEGIS Shaft Voltage
Tester Digital Oscilloscope
10:1 Probe with SVP Tip
1
1
1
1
Spare 10:1 Probe
1
1
1
1
Multimeter Test Leads
Rechargeable Battery
Power Supply (9.5V, 4A DC;
120/240 VAC)
Compact Carrying Case
Flash drive with
documentation
AEGIS Bearing Protection
Handbook
Alligator Grounding Clips
1
1
2
2
Spare AEGIS SVP Tips    
3
3
AEGIS Shaft Grounding
Simulator
   
Probe Holder    
Magnetic Base    
Warranty Length
90 days
2 years
2 years
2 years
ISO 17025 Calibration



 

Documentation

 Instructions

Shaft Voltage Testing Guide
Shaft Voltage Test Report Template Shaft Voltage Testing Report Template
YouTube Playlist on Shaft Voltage Tester Setup

Manuals & Specifications

AEGIS OSC-9200 Manual

AEGIS Shaft Voltage Tester
Datasheet(North American)

International Version

Lithium Ion Battery Safety Data Sheet

Lithium Ion Batteryn UN 38.3 Test Summary

 

Accessories

AEGIS SVP Shaft Voltage Probe Tips & Accessories

AEGIS SVP accessories can be used with any 10:1 oscilloscope with bandwidth at least 100 MHz and a BNC connector.

SVP-KIT-3000MB

SVP-KIT-9100MB includes:
3 SVP Tips, probe holder with two-piece extension rod (total length of probe holder plus rod of 18 inches), magnetic base, and Grounding Simulator.

SVP-KIT-3000

AEGIS-SVP-510 includes:
an AEGIS Voltage Probe (CAT II 300V) with BNC connector and AEGIS SVP Tip, and an alligator ground clip (not pictured).

SVP-TIP-3000

SVP-TIP-9100
3 replacement SVP Tips.

PWS-9100

PWS-9100
Replacement AC power adapter for AEGIS-OSC-9100. Input: 110-240V ac, 1.2A, 50-60Hz; output: 9V dc, 4A.